Call 08048601505 76% Response Rate

Send Email

Antiscalant & Water Softener Chemicals

Leading Manufacturer of reverse osmosis additives, descaling cleaning practice, cooling water treatment, boiling water treatment, waste water treatment and fuel additive from New Delhi.
Reverse Osmosis Additives

Reverse Osmosis Additives

Price on Request

Product Details:
Usage/ApplicationIndustrial
Grade StandardReagent Grade
IndustryPower Generation
CategoriesRO Membrane Treatment Chemicals
Physical StateLiquid
Reverse Osmosis Additives

Ro System if untreated cause several problem like inorganic, organic, colloibal and biofouling resulting in reduced permeate recovery, increased pressure differential, increased permeate conductivity, frequent memberance cleaning resuling premature memberance failure.

Fouling elements like carbonates, sulphates, silicates iron and fluoride etc. reduces permeability of membrance. Our RO additives are highly effective threshold agent that inhibits precipitation of these salts by increasing the solubility limit of the salts.

 

 Product  Description   Product Chemisrty  Doses
 RO-221  Organic,Colloidal & Biofoulant Cleaner  KOH, DSS, TKPP, EDTA  1.0 kg/.Module
 RO-222  Inorganic Foulants & Silica Cleaner  Citric Acid, Muriatic, HFA  1.0 kg/Module
 RO-223  UF Membrane, Cleaner   Alkaline Surfactant   1.0 kg/Module
 RO-224  Antiscalant/Antifoulant(Regular/Lo pH)  Phosphonate & Multi Polymer  4 ppm
 RO-225  Antiscalant/Dispersant(Silica Specific/Lo pH )  All Phosphonate  4 ppm
 RO-226  Antiscalant (Sulphate Specific/Lo pH)  Phosphonate & polymer  4 ppm
 RO-227  Antiscalant (Polymer)  Polymer & Phosphonae  5 ppm
 RO-228  Biocide (Non oxidising)  DBNPA  1 ppm online
 RO-229  Biocide (Non oxidising)  Isothiazoline  1 ppm online
 V-2  Antiscalant (Viscous)  Polymeric Compound  6 ppm online


Additional Information:

  • Item Code: 351
Get Best QuoteRequest Callback
Descaling Cleaning Practice

Descaling Cleaning Practice

Price on Request

Product Details:
Usage/ApplicationIndustrial
Grade StandardReagent Grade
BrandGensafe
Physical StatePowder
MaterialAlkaline Phosphate and Surfactant

Descaling/Chemical cleaning is more effective for theremoval of inorganic and organic deposits from processlines and equipments. Our cleaning program is a combinationof 3 elements. Solvents (acid, alkali, surfactant), Fluid velocity (stirring, spraying, agination, air rumbling and steam addition etc.) heat (hot water of hot surface). Cleaning is divided into 2 categories: preoperational cleaning and routine maintanance cleaning.


Descaling/; cleaning practice consists of safe and iniform cleaning of deposit (scaling/rust) from the heat transfer surface, process line without metal corrosion followed by proper passivation to check electrochemical reaction after cleaning.

 Product  Description   Product Chemisrty  Doses
 DC-321  Descalant  HCL, HSA, H2PO4 Inhibitor  10% solution
 DC-322  Descalant  Sulfomic, Antisilica, Inhibitor  5%  solution
 DC-323  Specialty Descalant   H2PO4, HFA  7%
 DC-324  Scale Softner   KOH, Surfactant   1% Solution 
 DC-325  Passivator  Alkaline Phosphate   0.5% Solution
 DC-326  Alkaline Descalant  Alkaline Suffactant  5% Solution
 DC-327  AHU/Radiatore Fins Cleaner  HFA, H2PO4  8% Solution 
 DC-328 (I),(II),(III)  Acid Inhibitor   Sulphonated Quats  1% Solution
 DC-329(I),(II)  Resin Cleaner  Suractant, Acid/Alkaline  3% Solution
 DC-330  Alkaline Boilout  Alkaline Phosphate   2% Solution 
Get Best QuoteRequest Callback
Cooling Water Treatment

Cooling Water Treatment

Price on Request

Product Details:
Water Source TypeIndustrial Wastewater
Treatment TechniqueRO
Usage/ApplicationIndustrial
BrandGensafe
IndustryPharmaceutical Industry
Automation GradeFully Automatic
Installation TypeComplete Civil work with Installation
Voltage380 Volt
Frequency50 hz
Power SourceElectric
MaterialHEDP. Zinc, Polyphosphate Azole and PBTC

The primary objectives of cooling warer treatment are to facilitate easy heat rejection and minimize water consumption. Colling involve the transfer of heat (Btu’s Kcal/Kg ) from one substance to another. The substance the loses heat is said to be cooled. And the one that receives the heat is referred as coolant.


Cooling water for the industries if untreated cause several problem i.e. corrosion, scaling, fouling microbiological growth in cooling towers, condensers, threat exchange and other parts, resulting in production loss, equipments failure and breakdowns. These problems can be overcome by using corrosion inhibitors, scale inhibitors, dispersants and biocides. 

Product

Description

Product Chemistry

Doses

CW-51

Sale / corrosion inhibitor

HEDP. Zinc

30 ppm

CW-522

Sale / corrosion inhibitor

Polyphosphate Azole

50 ppm

CW-523

Corrosion/ Sale inhibitor

PBTC, Terpolymer

35 ppm

CW-524

Corrosion/ Sale inhibitor

Orthophosphate, Molybdate

25 ppm

CW-525

Dispersant

Polymer

5 ppm

CW-526

Oil Dispersant

Polymer,PAC

2 ppm

CW-527

corrosion inhibitor (OC)

TT BZT Molybdater

20 ppm

CW-528

corrosion inhibitor(Chiller/CC)

Molybdate Nitrite, niocide

7500 ppm

CW-529

corrosion inhibitor (Hotwater)

Silicate, Moolybdate

5000 ppm

CW-530 (I), (II), (III)

Biocide

BKC/Phenol/Dichloraphene

100 ppm

CW-531 (I), (II), (III)

Micro biocide

Quat/carbamate/glutraldehyde

50 ppm

CW-532 (I), (II), (III)

Bio-Dispersant

DBNPA/Isothiazoline/Bronopol

25 ppm


Get Best QuoteRequest Callback
Boiling Water Treatment

Boiling Water Treatment

Price on Request

Product Details:
Water Source TypeBorewell Water
Treatment TechniqueRO
Usage/ApplicationIndustrial
BrandGensafe
IndustryPharmaceutical Industry
Automation GradeFully Automatic
Installation TypeComplete Civil work with Installation
Voltage380 V
Frequency50 Hz
Power SourceElectric
MaterialPhosphonate, Hydroxide and Morphelone

Water treatment for generation of steam is one of the most significant branches of water chemistry. Industries use steam, either in the process or generating power. Generation of steam is energy intensive and costly, therefore efficient production and utilization of steam is a prerequisite to keep over all cost of production down. Strategy for the boiler water treatment should be to use the boiler that operated with the highest efficiency for the longest possible time.

 

Boiler water should practise properly to prevent pitting/corrosion, scaling and carryover. Using some of the following specific result oriented boiler additives can prevent these problems to facilitate fast, safe, economical and reliable steam generation.

 

Product

Description

Product Chemistry

Doses

BW-421

Antiscalant

Anhydrous Phosphonate

5ppm

BW-422

Scale/corrosion inhibitor

Phosphate.Phosphonate

5ppm

BW-423

Sludge Conditioner

Phosphate,Polymer

5ppm

BW-424

pHBooster/Alkalinity

Hydroxide,Morphelone

10ppm

BW-425

Dispersant

Anionic Polymer,Trasar

2ppm

BW-426

Oxygen scavenger

Catl,Sulphite/Erythrobic

10ppm

BW-427

Silica Iron Sequester

Morpholene,DMEA

5ppm

BW-428

Vapour corrosion inhibitor

Cyclohexane,DEHA

2ppm

BW-429

Polyamine

DEHA,Cyclohexyl Amine

5ppm

BW-430

Multipurpose Treatment

PO4,SO3,Hydroxide

10ppm

 

Get Best QuoteRequest Callback
Waste Water Treatment

Waste Water Treatment

Price on Request

Product Details:
Water SourceSewerage
Service LocationCommercial
FrequencyMonthly
Type Of WasteBiodegradable
Automation GradeSemi-Automatic
MaterialAnionic, Cotionic, Amine and Silicon
Synthetic polymeric flocculants/ polyelectrolyte's are large water molecules made up of small building block called monomers. These materials react with the colloidal materials in the effluent water to formulation of floc. Wastewater additives are polyelectrolytes, decolourizer, cultured bacteria and defonmer to maintain desired wastewater parameter, Flocculants do not add soleds and also do not effect the pH of water unlike coagulants and alkali .


Effluent/sewage treatments program consist  of complte removal of pollutant and properly maintaining BOD, COD, MLSS and other desired parameters in wastewater. Less or compact sludge should be produced to minimize sludge handling and disposal cost.

 

Product

Description

Product chemistry

Doses

WW-621 (I), (II)

Flocculant (Anionic)

Anionic

0.5-1.0 ppm

WW-622 (I), (II)

Flocculant (nonionic)

nonionic

0.5-1.0 ppm

WW-623 (I), (II)

Flocculant (Cotionic)

Cotionic

0.5-1.0 ppm

WW-624

Biological Waste Water Treatment

ZR, Nutrient

10 ppm

WW-625 (I), (II)

Decolourizer

Amine

1-3 ppm

WW-626 (I), (II)

Defoamer

Silicon

2-5 ppm

WW-627

Coolant

MEG

--

WW-628

PPD

Polymer

1 ppm

WW-629

Disinfectant

Peracitic Silver

1-10 ppm

Get Best QuoteRequest Callback
Fuel Additive

Fuel Additive

Price on Request

Product Details:
Usage/ApplicationIndustrial
Grade StandardReagent Grade
BrandGensafe
Physical StatePowder
MaterialMagnesium,Organosilicon and EHN.Tungsten

Fuel Additives is designed keeping in mid typical fuel oil related problems and overall improvement in fuel economy. Use of microfloc  fuel additives insures reduction in oil sludge, prevention of corrosion in oil storage tank, pipelines and an objective of cleaner environment.


Our fuel additives also help to improve overall combustion efficiency by reduction in soot and clinker formation as well as maintaining desired stack temperature. Fireside chemical contain a combustion catalyst, slag modifiers, corrosion inhibitors and dust suppressants that help overall combustion resulting in better performance of furnace, boilers and D.G.

Product

Description

Product Chemistry

Doses

BW-431

Boiler Fireside

Magnesium Base

100gm/MT Fuel

BW-432

Boiler Fireside

Magnesium,Cobalt

100gm/MT Fuel

BW-433

Fuel Additive

Organosilicon

1.0 ltr/KL Fuel

BW-434

Fuel Additive

EHN.Tungsten

1.0 ltr/KL Fuel

Get Best QuoteRequest Callback

EXPLORE MORE CATEGORIES

Looking For "Antiscalant & Water Softener Chemicals"?
Thank you Your Enquiry has been sent successfully.
© Impulse Sales India. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.